TEL Staffing job details and career information

Mfg Eng II

Location
Savannah, Georgia
Wage
Hourly $55.00
Job ID
2683
Posted
2024-10-4


Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience. . Position Purpose: Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment. Principle Duties and Responsibilities: Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). . 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. . 14. Author DRDI/DMT rework instructions to support effective corrective actions. . 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. . 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. . 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. . 4. Investigate and assist in preparing justification for equipment and facility requests. . 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. . 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. . 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. . 8. Incorporate Lean Manufacturing Methodology into existing and future processes. . 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. . 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. . 12. Support all Safety, Sustainability and Ergonomic Initiatives. . 13. Aid in development and maintenance of Business Continuity Plan. . Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. . 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. . Perform other duties as assigned. Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles.. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.. 4. Lean Six Sigma Greenbelt Certification or higher preferred..


Comments

Previous experience working as a floor support Manufacturing Engineer with company and/or manufacturing/mechanical environment is highly preferred.

Experience with CATIA v5, Solumina II (specifically working Discrepancy Reports/Items), SAP (M-BOM creation, item creation, and work order alteration) or similar software is highly desired.

Final Line Mech II Savannah GA

Aircraft Tech II Savannah GA

Avionics Elec Tech II Savannah GA

Mfg Eng II Savannah GA

Mfg Eng II Savannah GA

Structural Mech II Savannah GA

Material Control Spec II Savannah GA

Avionics Elec Tech II Savannah GA

Cabinet Maker II Savannah GA

Avionics Elec Tech II Savannah GA

TEL Staffing Inc is a full-service staffing agency which has provided quality staffing services for all industries for 10 years, to include our growing Aerospace Division. At TEL, we do our very best to provide the most qualified candidates for the open positions where the client's AND employee's satisfaction are our main goals.



Top Employer TEL Staffing Jobs
Website
telstaffing.com/
Job Feed
View
News Feed
View
List All TEL Staffing Jobs

Don't wait, apply today.
We can't wait to receive your resume.

TEL Staffing is accepting resumes and actively recruiting for this Mfg Eng II position in Savannah, Georgia. Be sure to send your resume using the "Apply Now" button or by following the application instructions provided by the employer.

Mfg Eng II

Location: Savannah GA 31408

Industry: Aviation
Occupational Category: Engineering
Hours: Full-time, 40 hours per week
Salary: USD 55

Description: TEL Staffing seeks a Mfg Eng II.

Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience. . Position Purpose: Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment. Principle Duties and Responsibilities: Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). . 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. . 14. Author DRDI/DMT rework instructions to support effective corrective actions. . 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. . 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. . 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. . 4. Investigate and assist in preparing justification for equipment and facility requests. . 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. . 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. . 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. . 8. Incorporate Lean Manufacturing Methodology into existing and future processes. . 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. . 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. . 12. Support all Safety, Sustainability and Ergonomic Initiatives. . 13. Aid in development and maintenance of Business Continuity Plan. . Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. . 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. . Perform other duties as assigned. Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles.. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.. 4. Lean Six Sigma Greenbelt Certification or higher preferred..


Comments

Previous experience working as a floor support Manufacturing Engineer with company and/or manufacturing/mechanical environment is highly preferred.

Experience with CATIA v5, Solumina II (specifically working Discrepancy Reports/Items), SAP (M-BOM creation, item creation, and work order alteration) or similar software is highly desired.

Responsibilities:

Educational requirements:

Experience requirements:

Desired Skills:

Qualifications:

Benefits:

Incentives:

Date Posted: 2024-10-4

Please Apply by: 2024-10-20