ONIT Aviation Services Inc job details and career information

Savannah Tooling Inspect Sr Urgent

Location
Savannah, Georgia
Wage
Hourly
Job ID
AV2152251
Posted
2019-1-16


ONIT Aviation is seeking qualified Contract - Tooling Inspect Sr - 140819 in GAC Savannah

FAA Regulated?: No

Unique Skills:

CMM experience is preferred but experience with Laser Trackers, Articulating Arms or another 3D inspection device is acceptable. Metrolog metrology software preferred but not required. Experience with SA, Verisurf, PCDMIS, etc. also acceptable.

Education and Experience Requirements:

High school diploma/GED. Valid Drivers License required. Must be proficient in blueprint reading/interpretation, shop math, and quality control manual as required. Eight (8) years technically related experience to include at least six (6) years related inspection experience.

Position Purpose:

Under limited supervision, performs inspection duties and assists other tooling inspectors in general and technical aspects of Quality Control in a specified area of tooling inspection.

Principal Duties and Responsibilities:
Essential Functions: 1. Prepares inspection documentation and maintains files as required. Ensures current engineering revisions are incorporated per established procedures. 2. Performs periodic inspections to ensure compliance per FAA requirements and approved quality procedures. 3. Creates Model Base inspection processes using CATIA model based tool designs that can be used for both fabrication and rework of tools by the tool shop personnel. 4. Analyzes data using Metrologic inspection software and create electronic quality folders in SmarTeam to store inspection data for all model based tooling. 5. Promotes and maintains quality standards and processes. 6. Works with tooling suppliers to ensure the inspection data is correct and in the proper format on all in coming tools. 7. Makes recommendations to Tooling Management on continuous improvements in the tooling inspection area. 8. Ensures proper use and storage of area tools, equipment and supplies. Advises management of any associated problems or other requirements.

Additional Functions: 1. Assists other inspectors as required. 2. Performs other duties as assigned.

Other Requirements: 1. Ability to import and export inspection data in many different formats (Word, Excel, PDF, etc.). 2. Model Base systems (Cadam, Catia V4, Catia V5) experience preferred. 3. Must be proficient in use of inspection tools and equipment. 4. Must be proficient in use of conventional optical measurement equipment. 5. Must be competent with theodolite and laser tracker systems. 6. Ability to recognize potential problems with drawings and elevate to management. 7. Must be competent with coordinate measurement machines (CMM). 8. Must be competent with electronic tool record keeping system. 9. Must be able to lift up to 40 pounds & pass the vision test as required by area job responsibilities. 10. Must have good communication skills.

Additional Information

Requisition Number: 140819

Department: J0401-Metrology Tool Insp

Number of Openings: 1.0

Please reference Avjobs when applying for this position.

Savannah Pricing Analyst Sr - Savannah GA

Savannah Final Line Mech II - Savannah GA

Savannah Aircraft Painter 1 - Savannah GA

Savannah Structural Mech II Mult slots and depts - Savannah GA

Savannah Engineer Contractor 5 Electrical - Savannah GA

Savannah NDT Non Destructive Testing Tech II - Savannah GA

Savannah Structural Mech I Multi Slots and Depts - Savannah GA

Savannah RS Aircraft Technician Sr Service Center - Savannah GA

Savannah Manufacturing Engineer II Multiple Depts - Savannah GA

Savannah Avionics Electrical Tech Sr - Savannah GA

ONIT Aviation Services, founded in 1999 is growing steadily while maintaining the "Small Business Attitude" of doing "whatever it takes" to provide the best skilled and experienced technicians available at a competitive price. ONIT Aviation Services currently maintains a resume base operation made up of over 10,000 skilled technicians that have "Made the Cut". All Technicians working with the company are either personal acquaintances of the staff or Proven Technicians presently employed. Be assured that when you ask for techs from ONIT Aviation Services, you will receive the best qualified and motivated techs available, not just a warm body! As a Small Company your call is likely to be answered by our CEO/President, Jim Hillburn. Jim remains very deeply involved in all aspects of business here at ONIT Aviation Services. With over 30 years in Aviation Maintenance and Management, Jim is aware of, and familiar with, the daily concerns and needs of the Technicians and our customers. ONIT Aviation Services strives to provide the best positions available along with the most attractive pay packages. Check Our Job Openings! Positions Available Immediately!



Top Employeer ONIT Aviation Services Inc Jobs
Website
www.onitaviation.com/
Job Feed
View
News Feed
View
List All ONIT Aviation Services Inc Jobs

Don't wait, apply today.
We can't wait to receive your resume.

As of 1/17/2019, ONIT Aviation Services Inc is accepting resumes and actively recruiting for this Savannah Tooling Inspect Sr position in Savannah, Georgia. Be sure to send your resume using the "Apply Now" button or by following the application instructions provided by the employer.

Savannah Tooling Inspect Sr

Location: Savannah GA

Industry: Aviation
Occupational Category: Business Operations
Hours: Full-time, 40 hours per week
Salary: USD 0

Description: ONIT Aviation Services Inc seeks a Savannah Tooling Inspect Sr.

ONIT Aviation is seeking qualified Contract - Tooling Inspect Sr - 140819 in GAC Savannah

FAA Regulated?: No

Unique Skills:

CMM experience is preferred but experience with Laser Trackers, Articulating Arms or another 3D inspection device is acceptable. Metrolog metrology software preferred but not required. Experience with SA, Verisurf, PCDMIS, etc. also acceptable.

Education and Experience Requirements:

High school diploma/GED. Valid Drivers License required. Must be proficient in blueprint reading/interpretation, shop math, and quality control manual as required. Eight (8) years technically related experience to include at least six (6) years related inspection experience.

Position Purpose:

Under limited supervision, performs inspection duties and assists other tooling inspectors in general and technical aspects of Quality Control in a specified area of tooling inspection.

Principal Duties and Responsibilities:
Essential Functions: 1. Prepares inspection documentation and maintains files as required. Ensures current engineering revisions are incorporated per established procedures. 2. Performs periodic inspections to ensure compliance per FAA requirements and approved quality procedures. 3. Creates Model Base inspection processes using CATIA model based tool designs that can be used for both fabrication and rework of tools by the tool shop personnel. 4. Analyzes data using Metrologic inspection software and create electronic quality folders in SmarTeam to store inspection data for all model based tooling. 5. Promotes and maintains quality standards and processes. 6. Works with tooling suppliers to ensure the inspection data is correct and in the proper format on all in coming tools. 7. Makes recommendations to Tooling Management on continuous improvements in the tooling inspection area. 8. Ensures proper use and storage of area tools, equipment and supplies. Advises management of any associated problems or other requirements.

Additional Functions: 1. Assists other inspectors as required. 2. Performs other duties as assigned.

Other Requirements: 1. Ability to import and export inspection data in many different formats (Word, Excel, PDF, etc.). 2. Model Base systems (Cadam, Catia V4, Catia V5) experience preferred. 3. Must be proficient in use of inspection tools and equipment. 4. Must be proficient in use of conventional optical measurement equipment. 5. Must be competent with theodolite and laser tracker systems. 6. Ability to recognize potential problems with drawings and elevate to management. 7. Must be competent with coordinate measurement machines (CMM). 8. Must be competent with electronic tool record keeping system. 9. Must be able to lift up to 40 pounds & pass the vision test as required by area job responsibilities. 10. Must have good communication skills.

Additional Information

Requisition Number: 140819

Department: J0401-Metrology Tool Insp

Number of Openings: 1.0

Responsibilities:

Educational requirements:

Experience requirements:

Desired Skills:

Qualifications:

Benefits:

Incentives:

Date Posted: 2019-1-16

Please Apply by: 2019-2-1