Gulfstream Aerospace Corporation job details and career information

Sheetmetal Technician Ii Hot

Location
Appleton, Wisconsin
Wage
Hourly
Job ID
6789098892
Posted
2019-1-14

Sheetmetal Technician II (Weekend shift) in GAC Appleton Unique Skills: Aviation Sheet metal experience required. Education and Experience High School Diploma or GED required. Two (2) years experience of sheetmetal and/or fabrication experience. Valid Drivers License required. Purpose: The Sheetmetal Technician II works under general supervision to safely layout fabricate and install parts equipment and fabricated items on aircraft following established operating procedures. All work performed should be in accordance with company design specifications quality standards and completed work should meet customer expectations. Principle Duties and Essential Functions: 1. Safely perform sheet-metal layout fabrication and installation of parts equipment or fabricated items on aircraft under general supervision. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork sign-offs and quality specifications. 2. Use blueprints to cut and form plastics and follow standard operating procedures when using adhesives sealants and solvents. 3. Utilizing proper tooling shape and form complex angles and configurations according to blueprint specifications or written/verbal information. 4. Safely operate shop equipment such as: brakes presses riveting equipment shears and hand tools associated with sheet-metal functions. Use the proper hardware for various sheetmetal applications. 5. Comply with all safety 5S and housekeeping policies. Use personal protective equipment as required. Ensure aircraft interior is protected (PTP). 6. Assist in monthly 5S audits. 7. Use the material tracking system to create parts demand track squawks and to sign-off work. 8. Assist in developing initiatives to meet individual OGSM requirements as required. Additional Functions: 1. Participate in continuous improvement activities (e.g. YIAW Kaizen events etc.). 2. Properly use and maintain company-provided tools and equipment and returns items to tool room after use. 3. Ensure standard operating procedures are followed when operating ground support equipment. 4. Properly collect and dispose of waste fuel oil hydraulic fluids de-icing fluids and solvent rags. 5. Ensure accurate daily job charging to the aircraft. 6. Exchange job related information and coordinate work activities between shifts through turn over report meetings and direct contact with leadership. 7. Assist in maintaining shop equipment and associated JSAs. Perform other duties as assigned. Other 1. A working knowledge of sheet-metal installation and fabrication processes (measuring cutting bending forming and drilling of aluminum sheet stock angle and honeycomb) is required. 2. Ability to read and interpret blueprints and engineering documentation. 3. Valid drivers license required. to operate towing and other Gulfstream transportation equipment. 4. Ability to read write speak and understand the English language. 5. Able to use tools and equipment associated with sheetmetal installation and fabrication work. 6. Able to climb ladders and stairs work in small restricted areas lift up to 40 pounds and work any shift. 7. Must have a good working knowledge of computers and experience working with Microsoft Office suite. 8. Must be able to read write speak and understand the English language. Additional Information Requisition Number: 141909 Category: Operations Percentage of Travel: Up to 25% Shift: Weekend 1st Employment Type: Full-time Posting End Date: 01/14/2019 Gulfstream does not provide work visa sponsorship for this position unless the applicant is a currently sponsored Gulfstream employee. Legal Information - Site Utilities - Contacts - Sitemap Copyright ?? 2014 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation a wholly-owned subsidiary of General Dynamics (NYSE: GD) designs develops manufactures markets services and supports the worlds most technologically-advanced business jet aircraft

Avionics Electrical Technician I - Appleton WI

Aircraft Technician Ii - Pewaukee WI

Avionics Technician - Milwaukee WI

Senior Maintenance Technician Aviation - Salem OR

Composites Technician - Marana AZ

20274 Engineer Ii Aviation - Bellevue WA

Aircraft Electrical Technician Avionics Technician Travel - Atlanta GA

Production Technician - Eatontown NJ

Ndt Technician I - Grand Junction CO

Aircraft Technician - Tupelo MS

The following jobs have been promoted on the Aviation Ad Network and are to be considered - current, newsworthy aviation employment information (FYI). No guarantee is made as to the accuracy, completeness or timeliness of any information, projections or opinions in announcements obtained through the promoted jobs. The information contained in this announcement is compiled for the convenience of site visitors and is accepted by the site visitor on the condition that errors or omissions are not the responsibility of Avjobs and shall not be made the basis for any claim, demand or cause of action. Please visit this companys web site for additional details and information. Please reference Avjobs when applying.

Top Employeer Gulfstream Aerospace Corporation Jobs
Website
www.avjobs.com/companies
Job Feed
View
News Feed
View
List All Gulfstream Aerospace Corporation Jobs

Don't wait, apply today.
We can't wait to receive your resume.

As of 1/16/2019, Gulfstream Aerospace Corporation is accepting resumes and actively recruiting for this Sheetmetal Technician Ii position in Appleton, Wisconsin. Be sure to send your resume using the "Apply Now" button or by following the application instructions provided by the employer.

Sheetmetal Technician Ii

Location: Appleton WI

Industry: Aviation
Occupational Category: Maintenance
Hours: Full-time, 40 hours per week
Salary: USD 0

Description: Gulfstream Aerospace Corporation seeks a Sheetmetal Technician Ii.
Sheetmetal Technician II (Weekend shift) in GAC Appleton Unique Skills: Aviation Sheet metal experience required. Education and Experience High School Diploma or GED required. Two (2) years experience of sheetmetal and/or fabrication experience. Valid Drivers License required. Purpose: The Sheetmetal Technician II works under general supervision to safely layout fabricate and install parts equipment and fabricated items on aircraft following established operating procedures. All work performed should be in accordance with company design specifications quality standards and completed work should meet customer expectations. Principle Duties and Essential Functions: 1. Safely perform sheet-metal layout fabrication and installation of parts equipment or fabricated items on aircraft under general supervision. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork sign-offs and quality specifications. 2. Use blueprints to cut and form plastics and follow standard operating procedures when using adhesives sealants and solvents. 3. Utilizing proper tooling shape and form complex angles and configurations according to blueprint specifications or written/verbal information. 4. Safely operate shop equipment such as: brakes presses riveting equipment shears and hand tools associated with sheet-metal functions. Use the proper hardware for various sheetmetal applications. 5. Comply with all safety 5S and housekeeping policies. Use personal protective equipment as required. Ensure aircraft interior is protected (PTP). 6. Assist in monthly 5S audits. 7. Use the material tracking system to create parts demand track squawks and to sign-off work. 8. Assist in developing initiatives to meet individual OGSM requirements as required. Additional Functions: 1. Participate in continuous improvement activities (e.g. YIAW Kaizen events etc.). 2. Properly use and maintain company-provided tools and equipment and returns items to tool room after use. 3. Ensure standard operating procedures are followed when operating ground support equipment. 4. Properly collect and dispose of waste fuel oil hydraulic fluids de-icing fluids and solvent rags. 5. Ensure accurate daily job charging to the aircraft. 6. Exchange job related information and coordinate work activities between shifts through turn over report meetings and direct contact with leadership. 7. Assist in maintaining shop equipment and associated JSAs. Perform other duties as assigned. Other 1. A working knowledge of sheet-metal installation and fabrication processes (measuring cutting bending forming and drilling of aluminum sheet stock angle and honeycomb) is required. 2. Ability to read and interpret blueprints and engineering documentation. 3. Valid drivers license required. to operate towing and other Gulfstream transportation equipment. 4. Ability to read write speak and understand the English language. 5. Able to use tools and equipment associated with sheetmetal installation and fabrication work. 6. Able to climb ladders and stairs work in small restricted areas lift up to 40 pounds and work any shift. 7. Must have a good working knowledge of computers and experience working with Microsoft Office suite. 8. Must be able to read write speak and understand the English language. Additional Information Requisition Number: 141909 Category: Operations Percentage of Travel: Up to 25% Shift: Weekend 1st Employment Type: Full-time Posting End Date: 01/14/2019 Gulfstream does not provide work visa sponsorship for this position unless the applicant is a currently sponsored Gulfstream employee. Legal Information - Site Utilities - Contacts - Sitemap Copyright ?? 2014 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation a wholly-owned subsidiary of General Dynamics (NYSE: GD) designs develops manufactures markets services and supports the worlds most technologically-advanced business jet aircraft

Responsibilities:

Educational requirements:

Experience requirements:

Desired Skills:

Qualifications:

Benefits:

Incentives:

Date Posted: 2019-1-14

Please Apply by: 2019-1-30