Firefly Aerospace job details and career information

Quality Assurance Engineer Avionics Featured

Location
Cedar Park, Texas
Wage
Hourly
Job ID
26560801505
Posted
2023-1-25

ABOUT FIREFLY AEROSPACEFirefly Aerospace Inc. is an American end-to-end space transportation company committed to providing economical and convenient access to space for small payloads through the design manufacture and operation of reliable launch and spacecraft vehicles. Fireflys launch vehicles utilize common technologies manufacturing infrastructure and launch capabilities providing LEO launch solutions for up to ten metric tons of payload. Combined with Fireflys in-space vehicles such as the Space Utility Vehicle (SUV) and Blue Ghost Lunar Lander Firefly provides the space industry with a single source for missions from LEO to the surface of the Moon or beyond. Firefly is headquartered in Cedar Park TX.SUMMARYThis position is for a Quality Engineering professional reporting to the Quality Manager. The Quality Engineer will be responsible for leading quality activities during integration phases of production aiding in the development of work instructions supporting key quality check points while proactively supporting integration activities to ensure best practices and company policies are being applied/followed. May manage Quality Engineering processes and/or projects. Uses experience and knowledge to influence the development modification application and maintenance or quality evaluation control systems and protocols. Candidate shall be capable of implementing lean process and identifying areas of improvement to aid in cost reduction and eliminating waste.RESPONSIBILITIES Develop and Maintain inspection plans and quality control points within the manufacturing processes including statistical process control (SPC) and sampling plans Create and maintain standard work instructions for detail inspections Complete diverse paperwork and systems records for traceability and movement of products; perform product and process audits and drive Corrective Actions Perform training on inspection techniques and requirements Analyzes and makes changes to procedures processes and metrics that support compliance with regulatory standards and drive continuous improvement. Provides research and interpretation of regulations and requirements to ensure compliance with external standards. Implements standards tools and methods to ensure the effectiveness of quality processes and sustain quality performance improvements. Reviews procedures and metrics that impact quality and make necessary changes to ensure compliance with standards. Reviews quality data and determines if products and processes are aligned with regulatory standards. Prepares and maintains Quality documentation including Quality metrics. Manages projects and processes to reduce Cost of Poor Quality. Implement process improvements to support a Culture of Built in Quality (BIQ). Collaborate with cross functional teams to eliminate waste drive process and quality improvement by utilizing lean initiatives. Perform First Article Inspection of parts and assemblies to Drawing and Specification as per AS9102 and train others on performing and completing FAIRs Maintain records of First Article inspections Perform other duties as assigned QUALIFICATIONS Required Candidates for this role should possess a Bachelors degree and one-five years of prior relevant experience or an Advanced degree and one year of prior relevant experience Experience with standards and/or equivalent quality military or government standards in the Aerospace industry Demonstrated ability to read interpret and adhere to drawings specifications IPC-620 requirements and related quality control documentation and standards Strong interpersonal skills including the ability to communicate effectively both verbally and written Excellent organization skills. Willingness to work with a team share expertise and follow instructions to accomplish established goals Demonstrated ability to multi-task in a fast-paced team environmentDesired ASQ CQE 6Sigma or Equivalent Training / Experience Familiarity with AS9100 Familiarity with Newspace start up environmentsFirefly offers outstanding benefits for our employees including generous health dental and vision plans with low plan deductibles parental leave educational reimbursement short term disability pet Insurance and flexible PTO options.To conform to U.S. Government space technology export regulations including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen lawful permanent resident of the U.S. protected individual as defined by 8 U.S.C. 1324b(a)(3) or eligible to obtain the required authorizations from the U.S. Department of State. Firefly Aerospace Inc. is an Equal Opportunity Employer; employment with Firefly is governed based on merit competence and qualifications and will not be influenced in any manner by race color religion gender national origin/ethnicity veteran status disability status age sexual orientation gender identity marital status mental or physical disability or any other legally protected status.

Quality Assurance Inspector Avionics Cedar Park TX

Avionics Technician Corpus Christi TX

Aircraft Liaison Engineer San Antonio TX

Quality Control Analyst Airline Dallas TX

Flight Simulator Engineer Dallas TX

Model Based Systems Engineer Aircraft Systems With Security Clearance Round Rock TX

Quality Specialist Dripping Springs TX

Systems Engineer Aircraft Systems With Security Clearance Round Rock TX

Gnc Engineer Grapeland TX

Flight Test Engineer Boerne TX

The following jobs have been promoted on the Aviation Ad Network and are to be considered - current, newsworthy aviation employment information (FYI). No guarantee is made as to the accuracy, completeness or timeliness of any information, projections or opinions in announcements obtained through the promoted jobs. The information contained in this announcement is compiled for the convenience of site visitors and is accepted by the site visitor on the condition that errors or omissions are not the responsibility of Avjobs and shall not be made the basis for any claim, demand or cause of action. Please visit this companys web site for additional details and information. Please reference Avjobs when applying.

Top Employer Firefly Aerospace Jobs
Website
www.avjobs.com/companies
Job Feed
View
News Feed
View
List All Firefly Aerospace Jobs

Don't wait, apply today.
We can't wait to receive your resume.

Firefly Aerospace is accepting resumes and actively recruiting for this Quality Assurance Engineer Avionics position in Cedar Park, Texas. Be sure to send your resume using the "Apply Now" button or by following the application instructions provided by the employer.

Quality Assurance Engineer Avionics

Location: Cedar Park TX

Industry: Aviation
Occupational Category: Maintenance
Hours: Full-time, 40 hours per week
Salary: USD 0

Description: Firefly Aerospace seeks a Quality Assurance Engineer Avionics.
ABOUT FIREFLY AEROSPACEFirefly Aerospace Inc. is an American end-to-end space transportation company committed to providing economical and convenient access to space for small payloads through the design manufacture and operation of reliable launch and spacecraft vehicles. Fireflys launch vehicles utilize common technologies manufacturing infrastructure and launch capabilities providing LEO launch solutions for up to ten metric tons of payload. Combined with Fireflys in-space vehicles such as the Space Utility Vehicle (SUV) and Blue Ghost Lunar Lander Firefly provides the space industry with a single source for missions from LEO to the surface of the Moon or beyond. Firefly is headquartered in Cedar Park TX.SUMMARYThis position is for a Quality Engineering professional reporting to the Quality Manager. The Quality Engineer will be responsible for leading quality activities during integration phases of production aiding in the development of work instructions supporting key quality check points while proactively supporting integration activities to ensure best practices and company policies are being applied/followed. May manage Quality Engineering processes and/or projects. Uses experience and knowledge to influence the development modification application and maintenance or quality evaluation control systems and protocols. Candidate shall be capable of implementing lean process and identifying areas of improvement to aid in cost reduction and eliminating waste.RESPONSIBILITIES Develop and Maintain inspection plans and quality control points within the manufacturing processes including statistical process control (SPC) and sampling plans Create and maintain standard work instructions for detail inspections Complete diverse paperwork and systems records for traceability and movement of products; perform product and process audits and drive Corrective Actions Perform training on inspection techniques and requirements Analyzes and makes changes to procedures processes and metrics that support compliance with regulatory standards and drive continuous improvement. Provides research and interpretation of regulations and requirements to ensure compliance with external standards. Implements standards tools and methods to ensure the effectiveness of quality processes and sustain quality performance improvements. Reviews procedures and metrics that impact quality and make necessary changes to ensure compliance with standards. Reviews quality data and determines if products and processes are aligned with regulatory standards. Prepares and maintains Quality documentation including Quality metrics. Manages projects and processes to reduce Cost of Poor Quality. Implement process improvements to support a Culture of Built in Quality (BIQ). Collaborate with cross functional teams to eliminate waste drive process and quality improvement by utilizing lean initiatives. Perform First Article Inspection of parts and assemblies to Drawing and Specification as per AS9102 and train others on performing and completing FAIRs Maintain records of First Article inspections Perform other duties as assigned QUALIFICATIONS Required Candidates for this role should possess a Bachelors degree and one-five years of prior relevant experience or an Advanced degree and one year of prior relevant experience Experience with standards and/or equivalent quality military or government standards in the Aerospace industry Demonstrated ability to read interpret and adhere to drawings specifications IPC-620 requirements and related quality control documentation and standards Strong interpersonal skills including the ability to communicate effectively both verbally and written Excellent organization skills. Willingness to work with a team share expertise and follow instructions to accomplish established goals Demonstrated ability to multi-task in a fast-paced team environmentDesired ASQ CQE 6Sigma or Equivalent Training / Experience Familiarity with AS9100 Familiarity with Newspace start up environmentsFirefly offers outstanding benefits for our employees including generous health dental and vision plans with low plan deductibles parental leave educational reimbursement short term disability pet Insurance and flexible PTO options.To conform to U.S. Government space technology export regulations including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen lawful permanent resident of the U.S. protected individual as defined by 8 U.S.C. 1324b(a)(3) or eligible to obtain the required authorizations from the U.S. Department of State. Firefly Aerospace Inc. is an Equal Opportunity Employer; employment with Firefly is governed based on merit competence and qualifications and will not be influenced in any manner by race color religion gender national origin/ethnicity veteran status disability status age sexual orientation gender identity marital status mental or physical disability or any other legally protected status.

Responsibilities:

Educational requirements:

Experience requirements:

Desired Skills:

Qualifications:

Benefits:

Incentives:

Date Posted: 2023-1-25

Please Apply by: 2023-2-10