Embraer job details and career information

Lead A P Technician 2nd Shift Featured

Location
Ft Lauderdale, Florida
Wage
Hourly
Job ID
177695
Posted
2019-7-10


POSITION SUMMARY


The Lead AP Technician is responsible to the Manager Maintenance Operations for the overall utilization of his area to include the supervision of production personnel.



JOB RESPONSIBLITIES


  • To ensure safe work practices are followed.
  • To plan direct and coordinate the activities of his areas so as to minimize delays and increase production and efficiency.
  • To provide training and to assist subordinates in the proper procedures methods and practices to be followed in each respective duty.
  • To make available to personnel the necessary overhaul manuals service bulletins airworthiness directive and other required technical data.
  • The maintaining of all equipment and tools in a serviceable and working condition.
  • For ascertaining that all necessary work records are properly executed by the responsible person.
  • The proper handling of all parts while in repair process.
  • The preservation of all units or parts during process through the facility and after work is completed.
  • The initiation of requisitions for stock and materials as required.
  • The Lead Technician will be properly certificated in accordance with FAR Part 65.
  • In his absence all duties of the Lead Technician may be delegated by him to any qualified personnel as necessary. However such delegation does not relieve him of the overall responsibilities.

General Duties:

  • Performs routine inspections or special maintenance to prevent failures of aircraft mechanical systems and components; performs complete operations checks on hydraulic systems pneumatic systems plumbing precision assemblies rigging and controls etc.
  • Determines when a component should be repaired or replaced; decides upon necessary repair scheme quantity and type of parts needed to accomplish proper repair; secures necessary parts from Stores or departmental supplies.
  • Repairs reworks and modifies worn or defective assemblies making alterations or changes to units when necessary.
  • Follows approved maintenance procedures for subject component or system consulting internal procedures that have been FAA approved original equipment manufacturers (OEMs) technical data and work package instructions.
  • Inspects completed work before sign off to identify any needed rework; performs rework; ensures that repaired components meet prescribed standards and tolerances.
  • Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer.
  • Completes work package documentation by signing/stamping after finishing all designated operations.
  • Submits completed /in-progress work to Quality Assurance for final / in-progress inspection and re-certification of airworthiness.
  • Provides Supervisor with performance statistics and other operational data as requested.
  • Properly accounts for time and materials used in all inspection and maintenance activities.





ESSENTIAL KNOWLEDGE SKILLS AND ABILITIES


Education:

  • HS Diploma or GED required
  • An Associate Degree or Technical Certification is most common at this level and may be
  • FAA required within certain Technical Areas.
  • Journeyman Technician Role requiring Intermediate Skills to perform most of the standard tasks within the technical area assigned to.
  • A P License
  • Airframe and Power plant certificates required
  • FCC General Operators License a plus


Experience:


  • Master Technician Role requiring Expert skills to perform all standard and emerging tasks within the Technical Area assigned to.
  • Generally at least 8 years of experience or greater in area of responsibility in aircraft maintenance activities or substantiated equivalent experience.
  • Recent depot level aircraft maintenance and repair experience is required (repair of mechanical systems components hydraulics pneumatics plumbing rigging etc.); proficiency with interpretation of original equipment manufacturers technical data or work package instructions; experience using power or pneumatic hand tools.
  • Desired: Prior experience in executive jet repair facility and prefer Embraer 145 and or Legacy experience.
  • 5 -7 years supervisory/management position with heavy maintenance or MRO.


Knowledge Skills Abilities:

  • Assignments require Advanced Knowledge of all possible tasks and responsibilities within their Technical area as well as a strong understanding of External Regulations and Functional Work Standards that affect Technical Requirements and Outputs.
  • Role takes leadership for applying new processes and skills to improve the Technician Function Status Quo.
  • Ability to work quickly and efficiently.
  • Ability to work in a safe and professional manner.
  • Knowledge of FAA requirements for aircraft maintenance procedures.
  • Able to work at a rapid pace while ensuring quality work.
  • Ability to interpret and comprehend manufacturer and FAA approved work package instructions; ability to inspect and install parts/components.
  • Knowledge of machines and tools including their uses repairs and maintenance.
  • Knowledge of principles and processes for providing customer service.
  • Skilled with repairing troubleshooting installing and equipment maintenance.


Working Conditions / Environment/ Special Requirements

  • Ability to work in a safe professional manner adhering to all regulatory requirements including OSHA EPA State and Federal regulations.
  • As required by the position must have the ability to wear a respirator as per OSHA 29 CFR 1910.134 Respirator Protection regulations with no restrictions that would prevent the proper use and/or seal of the respirator.
  • Ability to work flexible hours and different shifts if required
  • Employees will be subject to the random drug and alcohol testing under FAA regulations







GENERAL COMMITMENT FOR ALL EMPLOYEES


  • Commitment to company values and complies with department norms policies directives and procedures.
  • Incorporates Lean and P3E processes and concepts into daily activities.
  • Strive for continuous improvement to processes and procedures.
  • Honors and protects confidential and proprietary documents and information.
  • Satisfies work schedule requirements.
  • The job description is not designed to cover or contain a comprehensive listing of all activities duties or responsibilities that are required by the employee. Performs other duties as assigned.



Category: Operational
Area: Customer Support

Material Supp Svs Agent I Ft Lauderdale FL

New Mro Executive Hangar Ap Technician All Disciplines And Levels Ft Lauderdale FL

New Mro Executive Hanr Ap Technician All Disciplines And Levels Ft Lauderdale FL

Painter Ii Ft Lauderdale FL

A P Technician Iii Weekend Shift Ft Lauderdale FL

Aog A P Technician Iv Ft Lauderdale FL

Aog A P Technician Ii Ft Lauderdale FL

Aircraft Delivery Specialist Melbourne FL

Aircraft Painter Multiple Openings Melbourne FL

Aircraft Interior Techiciain Multiple Openings Melbourne FL

We have built one of the largest aerospace companies in the world. This has been made possible thanks to the dedication of people from all over the world who have a genuine passion for stretching the boundaries of what is possible. It has been like this from the beginning, and we continue being guided by the desire to work with people motivated by this challenge. At Embraer, we pay attention to all the stages of professional life, which is why we offer educational programs and special projects that serve everybody, from talented youth to those looking beyond retirement. Here we have the opportunity to integrate different cultures into a global environment, and to follow personal development throughout the span of one’s career. Get to know the programs and positions we have available in Brazil and around the world. Understand that here our focus is on partnerships, human development, and allowing you to grow in areas that correspond to your interests. Come be a part of Embraer.



Top Employer Embraer Jobs
Website
www.embraer.com
Job Feed
View
News Feed
View
List All Embraer Jobs

Don't wait, apply today.
We can't wait to receive your resume.

Embraer is accepting resumes and actively recruiting for this Lead A P Technician 2nd Shift position in Ft Lauderdale, Florida. Be sure to send your resume using the "Apply Now" button or by following the application instructions provided by the employer.

Lead A P Technician 2nd Shift

Location: Ft Lauderdale FL

Industry: Aviation
Occupational Category: AP Mechanic
Hours: Full-time, 40 hours per week
Salary: USD 0

Description: Embraer seeks a Lead A P Technician 2nd Shift.

POSITION SUMMARY


The Lead AP Technician is responsible to the Manager Maintenance Operations for the overall utilization of his area to include the supervision of production personnel.



JOB RESPONSIBLITIES


General Duties:

  • Follows approved maintenance procedures for subject component or system consulting internal procedures that have been FAA approved original equipment manufacturers (OEMs) technical data and work package instructions.
  • Inspects completed work before sign off to identify any needed rework; performs rework; ensures that repaired components meet prescribed standards and tolerances.
  • Performs serviceability tests on repaired components/systems using test equipment specified by the original equipment manufacturer.
  • Completes work package documentation by signing/stamping after finishing all designated operations.
  • Submits completed /in-progress work to Quality Assurance for final / in-progress inspection and re-certification of airworthiness.
  • Provides Supervisor with performance statistics and other operational data as requested.
  • Properly accounts for time and materials used in all inspection and maintenance activities.





ESSENTIAL KNOWLEDGE SKILLS AND ABILITIES


Education:


Experience:



Knowledge Skills Abilities:


Working Conditions / Environment/ Special Requirements







GENERAL COMMITMENT FOR ALL EMPLOYEES




Category: Operational
Area: Customer Support

Responsibilities:

Educational requirements:

Experience requirements:

Desired Skills:

Qualifications:

Benefits:

Incentives:

Date Posted: 2019-7-10

Please Apply by: 2019-7-26