Boeing job details and career information

Radome Design & Analysis Engineer Senior Level Featured

Location
Berkeley, Missouri
Wage
Hourly
Job ID
00000253220
Posted
2022-7-1

Job Description

At Boeing, we innovate and collaborate to make the world a better place. From the seabed to outer space, you can contribute to work that matters with a company where diversity, equity and inclusion are shared values. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

The Boeing Company has an exciting opportunity for Senior Radome Design & Analysis Engineer (Level 5) for a Proprietary program in St Louis, MO.

The individual will be responsible for the electromagnetic design of advanced airborne radome and integrated fore body systems and will work closely with the airframe and sensor teams to bring the radome design from concept to production. Individual should be a high energy and detailed individual, capable of working independently and with a small team in the antenna and radome design/development field.

Primary job responsibilities:

  • Responsible for the hands-on design and realization of individual advanced radome systems.
  • Use computational electromagnetic analysis software (e.g., Ansys HFSS, Dassault Systems CST Studio Suite, MATLAB, CARLOS-3D, and CADDRAD) to design and predict performance on various types of radome systems.
  • Design and test of advanced structures using materials such as loaded honeycomb core and/or similar core geometries, loaded foams and elastomers, MAGRAM, R-Cards, Circuit Analog sheets / absorbers, and Frequency Selective Surfaces
  • Specify design and materials for radomes to be produced to meet RF performance specifications.
  • Design new radome products and test new materials to meet anticipated customer requirements or to add new products and technologies.
  • Creation of test plans and procedures to test radomes and verify RF performance specifications.
  • Able to analyze outputs from the anechoic chamber measurements, prepare summary reports comparing to RF performance specifications.
  • Participate and guide the testing of development radomes for required performance metrics: VSWR, insertion loss, gain, polarization, radar cross section (RCS), etc.
  • Radome requirement evaluation, initial concept trade-off and development, in-house and customer presentations, travel, and technical proposal writing and cost/schedule estimating.
  • Frequent inter-organizational and outside customer contacts. Represents the organization in providing solutions to difficult technical issues associated with specific projects.

Export Control:

This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship.

An interim and/or final U.S. Secret Clearance Post-Start is required.

Basic Qualifications (Required Skill/Experience):

  • Currently possess a Bachelors, Masters or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry
  • Experience in RF (Radio Frequency) theory and application
  • Experience in technical leadership
  • Experience working with Radar Cross Section, antenna, and/or radome measurement techniques

Preferred Qualifications (Desired Skills/Experience):

  • Experience in radome design and performance modeling and simulation
  • Demonstrated leadership for driving issue resolution and mitigating technical risk
  • Experience working with product/component developers and vendors who provide critical functionality to the overall system

Typical Education/Experience:

Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, or physics (e.g. Bachelor) and typically 14 or more years related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years related work experience, Master+12 years related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Relocation:

This position offers relocation based on candidate eligibility.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Work Shift:

First Shift

Travel:

Some travel will be required for this position, but will not be significant in the nearer term phases.


Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Mid Level Cybersecurity Specialist Berkeley MO

Radome Design & Analysis Engineer Senior Level Berkeley MO

Electrophysics Engineer Associate Level Berkeley MO

Electrophyics Engineer Senior Berkeley MO

Mid level Avionics Design Engineer Berkeley MO

Anti tamper Advanced Capabilities Team Senior Engineer Berkeley MO

Electrophysics Engineer Mid Level Berkeley MO

Senior Analysis, Integration, & Test Engineer Berkeley MO

F 15 Mission System Product Owner Mid Level Berkeley MO

Electrophysics Engineer Senior Berkeley MO

Boeing is the worlds largest aerospace company and leading manufacturer of commercial jetliners and defense space and security systems. As Americas biggest manufacturing exporter the company supports airlines and U.S. and allied government customers in more than 150 countries. Boeing products and tailored services include commercial and military aircraft satellites weapons electronic and defense systems launch systems advanced information and communication systems and performance-based logistics and training.

Top Employer Boeing Jobs
Website
jobs.boeing.com/
Job Feed
View
News Feed
View
List All Boeing Jobs

Don't wait, apply today.
We can't wait to receive your resume.

Boeing is accepting resumes and actively recruiting for this Radome Design & Analysis Engineer Senior Level position in Berkeley, Missouri. Be sure to send your resume using the "Apply Now" button or by following the application instructions provided by the employer.

Radome Design & Analysis Engineer Senior Level

Location: Berkeley MO

Industry: Aviation
Occupational Category: Electronic & Electrical Engineering
Hours: Full-time, 40 hours per week
Salary: USD 0

Description: Boeing seeks a Radome Design & Analysis Engineer Senior Level.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. From the seabed to outer space, you can contribute to work that matters with a company where diversity, equity and inclusion are shared values. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

The Boeing Company has an exciting opportunity for Senior Radome Design & Analysis Engineer (Level 5) for a Proprietary program in St Louis, MO.

The individual will be responsible for the electromagnetic design of advanced airborne radome and integrated fore body systems and will work closely with the airframe and sensor teams to bring the radome design from concept to production. Individual should be a high energy and detailed individual, capable of working independently and with a small team in the antenna and radome design/development field.

Primary job responsibilities:

  • Responsible for the hands-on design and realization of individual advanced radome systems.
  • Use computational electromagnetic analysis software (e.g., Ansys HFSS, Dassault Systems CST Studio Suite, MATLAB, CARLOS-3D, and CADDRAD) to design and predict performance on various types of radome systems.
  • Design and test of advanced structures using materials such as loaded honeycomb core and/or similar core geometries, loaded foams and elastomers, MAGRAM, R-Cards, Circuit Analog sheets / absorbers, and Frequency Selective Surfaces
  • Specify design and materials for radomes to be produced to meet RF performance specifications.
  • Design new radome products and test new materials to meet anticipated customer requirements or to add new products and technologies.
  • Creation of test plans and procedures to test radomes and verify RF performance specifications.
  • Able to analyze outputs from the anechoic chamber measurements, prepare summary reports comparing to RF performance specifications.
  • Participate and guide the testing of development radomes for required performance metrics: VSWR, insertion loss, gain, polarization, radar cross section (RCS), etc.
  • Radome requirement evaluation, initial concept trade-off and development, in-house and customer presentations, travel, and technical proposal writing and cost/schedule estimating.
  • Frequent inter-organizational and outside customer contacts. Represents the organization in providing solutions to difficult technical issues associated with specific projects.

Export Control:

This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship.

An interim and/or final U.S. Secret Clearance Post-Start is required.

Basic Qualifications (Required Skill/Experience):

  • Currently possess a Bachelors, Masters or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry
  • Experience in RF (Radio Frequency) theory and application
  • Experience in technical leadership
  • Experience working with Radar Cross Section, antenna, and/or radome measurement techniques

Preferred Qualifications (Desired Skills/Experience):

  • Experience in radome design and performance modeling and simulation
  • Demonstrated leadership for driving issue resolution and mitigating technical risk
  • Experience working with product/component developers and vendors who provide critical functionality to the overall system

Typical Education/Experience:

Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, or physics (e.g. Bachelor) and typically 14 or more years related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years related work experience, Master+12 years related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Relocation:

This position offers relocation based on candidate eligibility.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Work Shift:

First Shift

Travel:

Some travel will be required for this position, but will not be significant in the nearer term phases.


Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Responsibilities:

Educational requirements:

Experience requirements:

Desired Skills:

Qualifications:

Benefits:

Incentives:

Date Posted: 2022-7-1

Please Apply by: 2022-7-17