Boeing job details and career information

Inspector Fabrication B Featured

Location
Everett, Washington
Wage
Hourly
Job ID
00000296759
Posted
2022-7-1

Job Description

At Boeing, we innovate and collaborate to make the world a better place. From the seabed to outer space, you can contribute to work that matters with a company where diversity, equity and inclusion are shared values. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes (BCA) is currently seeking an Inspector Fabrication in Everett, WA.

Job Responsibilities include but are not limited to:

Inspectors in this position inspect raw stock, fabricated parts and sub-assemblies for conformance with applicable drawings, specifications, quality standards, manufacturing plans and for workmanship.

  • Fabrication Inspectors also perform various in-process inspections, audits and heat-treat inspections.

  • Receive, obtain or locate parts/assemblies and appropriate paperwork/online instruction per required procedures.

  • Verify part number, serial number and that the quantity matches paperwork or online system.

  • Verify all paperwork/online instruction (e.g., manufacturing order, applicable drawings, specifications, nonconformance items and any other necessary documents) is complete and accurate.

  • Ensure that appropriate revisions of drawings, Engineering Changes, specifications and other documents are being used by the shop and inspection.

  • Ensure that the tools used by the shop to fabricate parts have been approved by tooling inspection.

  • Review the paperwork/online instruction, drawing and job.

  • Select and/or set up the appropriate measuring instruments.

  • Lay out parts/assemblies to establish reference points and check dimensions, as required.

  • Inspect dimensions and workmanship per the drawing, specification and plan.

  • Perform visual weld inspection, as required.

  • Identify and document discrepancies and reject parts/assemblies.

  • Indicate QA acceptance on the appropriate paperwork/online instruction and process as required.

  • Perform in-process inspections and audits, as required.

  • Monitor equipment and processes to specification requirements.

  • Verify certifications of tools, equipment and personnel.

  • Interface with other organizations to provide clarification and/or information.

  • Handle, use and dispose of hazardous materials in approved manner.

  • This position requires occasional (1-3 Hrs) finger manipulation, flexion/extension, handling, lifting less than 25 pounds, Rotation of head/neck, Sitting, Standing, and Walking.

  • Occasional contact with metals, exposure to plastics and solvents and exposure to atmospheric conditions. Frequent (3-6 hrs) exposure to noise.

  • Use of personal protective equipment for face/eyes and ears may be required.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a United States Person as defined by 22 C.F.R. §120.15 is required.  "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee.

Shift:

This position is a variable shift. Candidate must be flexible on which shift they will work.

Basic Qualifications (Required):

  • Must have 1 or more years of experience doing quality Inspections and/or Auditing.

  • Must have 1 or more years of experience reading and understanding engineering drawings, blueprints, schematics, and specifications.

  • Must have 1 or more years of experience in metal or composite fabrication.

Typical Education:

High school graduate or GED preferred.

Relocation:

This position does offer relocation to qualified candidates

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Other Relevant Information & Requirements:

  • Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will be considered as this job is not installed in QTTP.

  • This is an hourly position governed by the IAM Collective Bargaining agreement.

  • Internal applicants must apply through the ERT process.


Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Associate Reliability and Maintainability Technician Everett WA

Inspector Customer Coordinator Factory Everett WA

Boeing Research and Technology Manufacturing Technology Integration – Comme Everett WA

Senior Reliability and Maintainability Technician Everett WA

Systems Engineer Model Based Engineering Lead Everett WA

Experienced Reliability and Maintainability Technician Everett WA

Aviation Maintenance Technician and Inspector Machinist AOG Everett WA

Silk Screener Decorative Panels B Everett WA

Mid Level Staff Analyst Electrical Systems Responsibility Center Everett WA

Design & Analysis Engineer 4 Cabin, Network & Security Systems Offboard Everett WA

Boeing is the worlds largest aerospace company and leading manufacturer of commercial jetliners and defense space and security systems. As Americas biggest manufacturing exporter the company supports airlines and U.S. and allied government customers in more than 150 countries. Boeing products and tailored services include commercial and military aircraft satellites weapons electronic and defense systems launch systems advanced information and communication systems and performance-based logistics and training.

Top Employer Boeing Jobs
Website
jobs.boeing.com/
Job Feed
View
News Feed
View
List All Boeing Jobs

Don't wait, apply today.
We can't wait to receive your resume.

Boeing is accepting resumes and actively recruiting for this Inspector Fabrication B position in Everett, Washington. Be sure to send your resume using the "Apply Now" button or by following the application instructions provided by the employer.

Inspector Fabrication B

Location: Everett WA

Industry: Aviation
Occupational Category: All Hourly Unions
Hours: Full-time, 40 hours per week
Salary: USD 0

Description: Boeing seeks a Inspector Fabrication B.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. From the seabed to outer space, you can contribute to work that matters with a company where diversity, equity and inclusion are shared values. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes (BCA) is currently seeking an Inspector Fabrication in Everett, WA.

Job Responsibilities include but are not limited to:

Inspectors in this position inspect raw stock, fabricated parts and sub-assemblies for conformance with applicable drawings, specifications, quality standards, manufacturing plans and for workmanship.

  • Fabrication Inspectors also perform various in-process inspections, audits and heat-treat inspections.

  • Receive, obtain or locate parts/assemblies and appropriate paperwork/online instruction per required procedures.

  • Verify part number, serial number and that the quantity matches paperwork or online system.

  • Verify all paperwork/online instruction (e.g., manufacturing order, applicable drawings, specifications, nonconformance items and any other necessary documents) is complete and accurate.

  • Ensure that appropriate revisions of drawings, Engineering Changes, specifications and other documents are being used by the shop and inspection.

  • Ensure that the tools used by the shop to fabricate parts have been approved by tooling inspection.

  • Review the paperwork/online instruction, drawing and job.

  • Select and/or set up the appropriate measuring instruments.

  • Lay out parts/assemblies to establish reference points and check dimensions, as required.

  • Inspect dimensions and workmanship per the drawing, specification and plan.

  • Perform visual weld inspection, as required.

  • Identify and document discrepancies and reject parts/assemblies.

  • Indicate QA acceptance on the appropriate paperwork/online instruction and process as required.

  • Perform in-process inspections and audits, as required.

  • Monitor equipment and processes to specification requirements.

  • Verify certifications of tools, equipment and personnel.

  • Interface with other organizations to provide clarification and/or information.

  • Handle, use and dispose of hazardous materials in approved manner.

  • This position requires occasional (1-3 Hrs) finger manipulation, flexion/extension, handling, lifting less than 25 pounds, Rotation of head/neck, Sitting, Standing, and Walking.

  • Occasional contact with metals, exposure to plastics and solvents and exposure to atmospheric conditions. Frequent (3-6 hrs) exposure to noise.

  • Use of personal protective equipment for face/eyes and ears may be required.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a United States Person as defined by 22 C.F.R. §120.15 is required.  US Person includes US Citizen, lawful permanent resident, refugee, or asylee.

Shift:

This position is a variable shift. Candidate must be flexible on which shift they will work.

Basic Qualifications (Required):

  • Must have 1 or more years of experience doing quality Inspections and/or Auditing.

  • Must have 1 or more years of experience reading and understanding engineering drawings, blueprints, schematics, and specifications.

  • Must have 1 or more years of experience in metal or composite fabrication.

Typical Education:

High school graduate or GED preferred.

Relocation:

This position does offer relocation to qualified candidates

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Other Relevant Information & Requirements:

  • Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will be considered as this job is not installed in QTTP.

  • This is an hourly position governed by the IAM Collective Bargaining agreement.

  • Internal applicants must apply through the ERT process.


Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Responsibilities:

Educational requirements:

Experience requirements:

Desired Skills:

Qualifications:

Benefits:

Incentives:

Date Posted: 2022-7-1

Please Apply by: 2022-7-17