Boeing job details and career information

Entry Level Fabrication Specialist – Metals Assembly Featured

Location
Salt Lake City, Utah
Wage
Hourly
Job ID
00000321879
Posted
2022-6-28

Job Description

At Boeing, we innovate and collaborate to make the world a better place. From the seabed to outer space, you can contribute to work that matters with a company where diversity, equity and inclusion are shared values. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is seeking a Fabrication Specialist (Level A) to support the Metals Assembly Team in Salt Lake City, Utah or West Jordan, Utah on Multiple Shifts.

Position Responsibilities:

  • Performs machine set-up, machining, welding set-up, welding, sheet metal fabrication and extrusion, tube bending and fabrication tasks;

  • Performs composite lay-up, fabrication and assembly tasks;

  • Assembles precision mechanical and electro-mechanical components;

  • Assembles, repairs, modifies and installs various power plants and drive trains;

  • Perform soldering on electronic and avionics products;

  • Assembles and installs wire harnesses and avionics products;

  • Prepares test articles, fixtures and data collection devices to perform various tests;

  • Performs basic organic chemical conversion and paint preparation;

  • Applies routine organic coatings for corrosion protection and appearance requirements;

  • Works on articles of moderate complexity using established drawings and requirements.

This position is expected to be 100% onsite.  The selected candidate will be required to work onsite at one of the listed location options: Lake City, UT or West Jordan, UT.
Employer will not sponsor applicants for employment visa status.

Basic Qualifications (Required Skills/Experience):

  • Ability to work any shift, weekends, and overtime as needed;

  • Able to lift up to 35 lbs.; Frequent lifting up to 10 lbs.; Occasional carrying, lifting, pushing/pulling, walking, standing, balancing; Frequent reaching overhead and at or above shoulder; Frequent sitting; Frequent climbing.

Preferred Qualifications (Desired Skills/Experience):

  • Minimum 3 months experience in Aerospace, Fabrication, or Manufacturing experience.

  • Experience with managing or working to safety, quality, and manufacturing performance data.

  • Experience with Lean Principles (Continuous Improvement, Standard Work, and 5-S tools).

Typical Education/Experience: 
Education/experience typically acquired through basic education (e.g. high school diploma/GED).

Relocation:

Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.  

Shift Work Statement:

This position is multiple shifts, you might work with different hours:
1st shift hours:
6.45 AM - 3.30 PM;

2nd shift hours 3:30 PM – 12 AM.

Union:

This is a non-union represented position.

Employee Referral:

Referral to this job is eligible for bonus.


Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Shipside Operations Specialist Salt Lake City UT

Entry Level Aircraft Painter Salt Lake City UT

Quality Engineer level 3 Salt Lake City UT

Associate Fabrication Specialist – Metals Assembly Salt Lake City UT

Entry Level CNC Machinist Salt Lake City UT

Entry Level Fabrication Specialist – Metals Assembly Salt Lake City UT

Entry Level CNC Machinist Salt Lake City UT

Entry Level CNC Machinist Salt Lake City UT

Experienced Non Destructive Test Quality Test Specialist West Jordan UT

Mid Level Industrial Hygienist Layton UT

Boeing is the worlds largest aerospace company and leading manufacturer of commercial jetliners and defense space and security systems. As Americas biggest manufacturing exporter the company supports airlines and U.S. and allied government customers in more than 150 countries. Boeing products and tailored services include commercial and military aircraft satellites weapons electronic and defense systems launch systems advanced information and communication systems and performance-based logistics and training.

Top Employer Boeing Jobs
Website
jobs.boeing.com/
Job Feed
View
News Feed
View
List All Boeing Jobs

Don't wait, apply today.
We can't wait to receive your resume.

Boeing is accepting resumes and actively recruiting for this Entry Level Fabrication Specialist – Metals Assembly position in Salt Lake City, Utah. Be sure to send your resume using the "Apply Now" button or by following the application instructions provided by the employer.

Entry Level Fabrication Specialist – Metals Assembly

Location: Salt Lake City UT

Industry: Aviation
Occupational Category: Fabrication
Hours: Full-time, 40 hours per week
Salary: USD 0

Description: Boeing seeks a Entry Level Fabrication Specialist – Metals Assembly.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. From the seabed to outer space, you can contribute to work that matters with a company where diversity, equity and inclusion are shared values. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is seeking a Fabrication Specialist (Level A) to support the Metals Assembly Team in Salt Lake City, Utah or West Jordan, Utah on Multiple Shifts.

Position Responsibilities:

  • Performs machine set-up, machining, welding set-up, welding, sheet metal fabrication and extrusion, tube bending and fabrication tasks;

  • Performs composite lay-up, fabrication and assembly tasks;

  • Assembles precision mechanical and electro-mechanical components;

  • Assembles, repairs, modifies and installs various power plants and drive trains;

  • Perform soldering on electronic and avionics products;

  • Assembles and installs wire harnesses and avionics products;

  • Prepares test articles, fixtures and data collection devices to perform various tests;

  • Performs basic organic chemical conversion and paint preparation;

  • Applies routine organic coatings for corrosion protection and appearance requirements;

  • Works on articles of moderate complexity using established drawings and requirements.

This position is expected to be 100% onsite.  The selected candidate will be required to work onsite at one of the listed location options: Lake City, UT or West Jordan, UT.
Employer will not sponsor applicants for employment visa status.

Basic Qualifications (Required Skills/Experience):

  • Ability to work any shift, weekends, and overtime as needed;

  • Able to lift up to 35 lbs.; Frequent lifting up to 10 lbs.; Occasional carrying, lifting, pushing/pulling, walking, standing, balancing; Frequent reaching overhead and at or above shoulder; Frequent sitting; Frequent climbing.

Preferred Qualifications (Desired Skills/Experience):

  • Minimum 3 months experience in Aerospace, Fabrication, or Manufacturing experience.

  • Experience with managing or working to safety, quality, and manufacturing performance data.

  • Experience with Lean Principles (Continuous Improvement, Standard Work, and 5-S tools).

Typical Education/Experience: 
Education/experience typically acquired through basic education (e.g. high school diploma/GED).

Relocation:

Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.  

Shift Work Statement:

This position is multiple shifts, you might work with different hours:
1st shift hours:
6.45 AM - 3.30 PM;

2nd shift hours 3:30 PM – 12 AM.

Union:

This is a non-union represented position.

Employee Referral:

Referral to this job is eligible for bonus.


Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Responsibilities:

Educational requirements:

Experience requirements:

Desired Skills:

Qualifications:

Benefits:

Incentives:

Date Posted: 2022-6-28

Please Apply by: 2022-7-14