AIC job details and career information

Avionics electrical Engineer Featured

Location
Vacaville, California
Wage
Hourly
Job ID
645303219
Posted
2019-2-13




Primary Areas of Responsibilities:

  1. Develop new avionics and electrical components for the aircraft. Coordinate the development with all appropriate stakeholders
  2. Develop aircraft electrical system schematics harness and installation drawings
  3. Manage electrical system projects with external suppliers. Ensure technical requirements and schedule are met
  4. Support the production floor with aircraft installation and testing of electrical system components
  5. Support MRB team with NCR disposition
  6. Support CS&S team with troubleshooting and provide technical guidance
  7. Work closely with flight test team to install and test new component/system designs
  8. Develop test requirements and assist in electrical components testing and troubleshooting
  9. Perform system calculations and studies for electrical power systems - load analysis voltage drop and wire sizing


  1. Release of high-quality electrical designs
  2. Meet schedule deadlines
  3. Positive feedback from suppliers and coworkers
  4. Has effectively been a team player and contributed to the development of the A5 in meaningful way


  • B.S. or M.S. in Electrical or Electronics Engineering
  • Minimum 5 years designing and integrating aerospace avionics and electrical systems
  • Experience with production aircraft wire harness and avionics installation routing and testing
  • Experience creating wiring harness and cable routing diagrams
  • Experience with new product development and product life cycle from concept to production
  • Hands-on experience with testing and troubleshooting wiring harnesses and electrical components working closely with technicians
  • Experience creating technical requirement documents test plans and compliance reports
  • Electrical load analysis and failure mode analysis experience
  • Familiar with test equipment used for electrical testing such as multimeters oscilloscopes and signal generators


  • 8+ years of experience designing aircraft electrical systems
  • Experience with Creo and Creo Schematics
  • Ability to design low-to-medium complexity digital circuitry
  • Software experience such as Visual Basic and C++
  • Startup experience


  • Highly intelligent - Analytical and problem solver
  • Confident
  • Collaborative
  • Self-starter
  • Energetic/Passionate
  • Team player
  • Good judgment
  • Decisive



Primary Areas of Responsibilities:

Develop new avionics and electrical components for the aircraft. Coordinate the development with all appropriate stakeholders
Develop aircraft electrical system schematics harness and installation drawings
Manage electrical system projects with external suppliers. Ensure technical requirements and schedule are met
Support the production floor with aircraft installation and testing of electrical system components
Support MRB team with NCR disposition
Support CS&S team with troubleshooting and provide technical guidance
Work closely with flight test team to install and test new component/system designs
Develop test requirements and assist in electrical components testing and troubleshooting
Perform system calculations and studies for electrical power systems - load analysis voltage drop and wire sizing

Release of high-quality electrical designs
Meet schedule deadlines
Positive feedback from suppliers and coworkers
Has effectively been a team player and contributed to the development of the Aircraft in meaningful way

B.S. or M.S. in Electrical or Electronics Engineering
Minimum 5 years designing and integrating aerospace avionics and electrical systems
Experience with production aircraft wire harness and avionics installation routing and testing
Experience creating wiring harness and cable routing diagrams
Experience with new product development and product life cycle from concept to production
Hands-on experience with testing and troubleshooting wiring harnesses and electrical components working closely with technicians
Experience creating technical requirement documents test plans and compliance reports
Electrical load analysis and failure mode analysis experience
Familiar with test equipment used for electrical testing such as multimeters oscilloscopes and signal generators

8+ years of experience designing aircraft electrical systems
Experience with Creo and Creo Schematics
Ability to design low-to-medium complexity digital circuitry
Software experience such as Visual Basic and C++
Startup experience

Highly intelligent - Analytical and problem solver
Confident
Collaborative
Self-starter
Energetic/Passionate
Team player
Good judgment
Decisive

Flight Software Engineer - Half Moon Bay CA

Guidance Navigation And Controls Engineer - Simi Valley CA

Avionics Field Applications Engineer - Torrance CA

Associate Spacecraft Systems Engineer - Palo Alto CA

Assoc Aerospace Engineer Job - Northridge CA

Manufacturing Engineer Ii Burbank Ca - Burbank CA

Sr Tech Support Engineer Ii With Security Clearance - Lemoore CA

Mission Planning Test Engineer scientist And Engineering Level With Securit - Beale Afb CA

Aerospace Process Engineer - Thousand Oaks CA

Avionics Test Engineer - Los Angeles CA

The following jobs have been promoted on the Aviation Ad Network and are to be considered - current, newsworthy aviation employment information (FYI). No guarantee is made as to the accuracy, completeness or timeliness of any information, projections or opinions in announcements obtained through the promoted jobs. The information contained in this announcement is compiled for the convenience of site visitors and is accepted by the site visitor on the condition that errors or omissions are not the responsibility of Avjobs and shall not be made the basis for any claim, demand or cause of action. Please visit this companys web site for additional details and information. Please reference Avjobs when applying.

Top Employer AIC Jobs
Website
www.avjobs.com/companies
Job Feed
View
News Feed
View
List All AIC Jobs

Don't wait, apply today.
We can't wait to receive your resume.

As of 2/17/2019, AIC is accepting resumes and actively recruiting for this Avionics electrical Engineer position in Vacaville, California. Be sure to send your resume using the "Apply Now" button or by following the application instructions provided by the employer.

Avionics electrical Engineer

Location: Vacaville CA

Industry: Aviation
Occupational Category: Engineering
Hours: Full-time, 40 hours per week
Salary: USD 0

Description: AIC seeks a Avionics electrical Engineer.



Primary Areas of Responsibilities:

  1. Develop new avionics and electrical components for the aircraft. Coordinate the development with all appropriate stakeholders
  2. Develop aircraft electrical system schematics harness and installation drawings
  3. Manage electrical system projects with external suppliers. Ensure technical requirements and schedule are met
  4. Support the production floor with aircraft installation and testing of electrical system components
  5. Support MRB team with NCR disposition
  6. Support CS&S team with troubleshooting and provide technical guidance
  7. Work closely with flight test team to install and test new component/system designs
  8. Develop test requirements and assist in electrical components testing and troubleshooting
  9. Perform system calculations and studies for electrical power systems - load analysis voltage drop and wire sizing


  1. Release of high-quality electrical designs
  2. Meet schedule deadlines
  3. Positive feedback from suppliers and coworkers
  4. Has effectively been a team player and contributed to the development of the A5 in meaningful way









Primary Areas of Responsibilities:

Develop new avionics and electrical components for the aircraft. Coordinate the development with all appropriate stakeholders
Develop aircraft electrical system schematics harness and installation drawings
Manage electrical system projects with external suppliers. Ensure technical requirements and schedule are met
Support the production floor with aircraft installation and testing of electrical system components
Support MRB team with NCR disposition
Support CS&S team with troubleshooting and provide technical guidance
Work closely with flight test team to install and test new component/system designs
Develop test requirements and assist in electrical components testing and troubleshooting
Perform system calculations and studies for electrical power systems - load analysis voltage drop and wire sizing

Release of high-quality electrical designs
Meet schedule deadlines
Positive feedback from suppliers and coworkers
Has effectively been a team player and contributed to the development of the Aircraft in meaningful way

B.S. or M.S. in Electrical or Electronics Engineering
Minimum 5 years designing and integrating aerospace avionics and electrical systems
Experience with production aircraft wire harness and avionics installation routing and testing
Experience creating wiring harness and cable routing diagrams
Experience with new product development and product life cycle from concept to production
Hands-on experience with testing and troubleshooting wiring harnesses and electrical components working closely with technicians
Experience creating technical requirement documents test plans and compliance reports
Electrical load analysis and failure mode analysis experience
Familiar with test equipment used for electrical testing such as multimeters oscilloscopes and signal generators

8+ years of experience designing aircraft electrical systems
Experience with Creo and Creo Schematics
Ability to design low-to-medium complexity digital circuitry
Software experience such as Visual Basic and C++
Startup experience

Highly intelligent - Analytical and problem solver
Confident
Collaborative
Self-starter
Energetic/Passionate
Team player
Good judgment
Decisive

Responsibilities:

Educational requirements:

Experience requirements:

Desired Skills:

Qualifications:

Benefits:

Incentives:

Date Posted: 2019-2-13

Please Apply by: 2019-3-1